3nd CONSTRUCTION METHOD

3nd CONSTRUCTION METHOD

1) External walls

The walls are constructed using industrial iron (dimensions 30mm x 100mm) and ceramic bricks K100. 

The outside part of external walls is constructed according to the following stages:


  • • 1st stage: First coating
  • • 2nd stage: Installation of 50 mm inflated graphite polystyrene insulation panel with glue and plugs.
  • • 3rd stage: Coating with fiberglass mesh and glue.
  • • 4th stage: Final stage with organic coating (ready to use plaster)

 

The inside part of external walls is constructed according to the following stages:


  • 1st stage: Fist coating.
  • 2nd stage: Cement-mortar coating.
  • 3rd stage: Marble dust coating or black sand coating.

 

2) Internal walls

The walls are constructed using industrial iron (dimensions 30mm x 100mm) and ceramic bricks K100. Then, both sides of the walls are coated according to the stages followed for the construction of the inside part of external walls.

 

3) Ceilings

They are constructed by industrial iron (dimensions 20mm x 30 mm), daring reinforcement (dimensions 150mm x 150mm) and inflated polystyrene insulation panels of 30 mm. Then the ceilings are coated according to the stages followed for the construction of the inside part of external walls.

Note: Coatings involve the following stages.


  • 1st stage: First coating, with elastomeric insulation materials replaces lime and makes plaster WATERPROOF, protecting this way the metals from moisture, lime and various weather conditions.
  • 2nd stage: Cement-mortar coating. (materials used: sand, big quantity of cement and lime).
  • 3rd stage: Marble dust coating or black sand coating (materials used: marble dust or black sand, cement and lime)

 

4) Roof

Metal roof trusses using industrial iron (dimensions 38mm x 38mm). There, we apply extremely thin wooden boards, a special membrane, studs (dimensions 4cm x 6cm) and Holland Style roof tiles, according to EU specification static studies.

 

5) Antirust prevention of the metal parts of the construction

All the metal parts of the construction are painted, both internally and externally, with the dipping paint method in rust preventive primer based on alkyd resin with a density of 1,60 – 1,66.

 

6) Hydraulic piping system

The whole piping system is based on submerged hot and cold water pipelines, made of green heat-sealing pipes, resistant up to -25°C. Moreover, the home drainage system, using siphons, ends outside the house.

 

7) Heating system (piping – radiators)

Installation of single pipe system. Boiler and radiators are not included

 

8) Electrical systems

According to the EU Regulations, the whole electrical system of the house is submerged, with cables and a metal electric switchboard. Two reinforced sockets in the kitchen, over the kitchen bench and a socket for the hairdryer in the bathroom are included. There are also included electric supply lines for the refrigerator, the kitchen oven, the dishwasher, the washing machine, the air-condition, the water heater, the doorbell, a telephone line and a television line (the installation is done according to the customer’s choice). Both switches and sockets are made in Europe. Moreover, we supply single phase power up to your house


9) Interior frames

They are made of excellent quality wood with laminate coating. You can choose the colour you prefer in our exhibition area, where you can also find a huge variety of door handles and locks.

 

10) External frames

German made KBE System 70 mm composite panel external frames and front door frame of white colour. You can choose what you prefer by visiting our exhibition area.

 

11) Window glasses

Double glass (transparent) windows (dimensions 0,4mm+0,4mm).

 

12) Kitchen cabinets

Melamine kitchen cabinets of excellent quality, Soft Forming, hanging or base ones, up to 6 meters. Cabinets’ height 90cm, with kitchen bench and an embedded kitchen sink with two tanks. Kitchen tiles and a hot and cold water tap, which you can choose from our exhibition area, all made in Italy, are installed over the kitchen bench.

 

13) Wardrobes in the bedrooms

Melamine wardrobes of excellent quality, Soft Forming, in each bedroom, including wardrobe handles of your choice (dimensions 1,80m x 2,70m each).

 

14) Floors

All the tiles are made in Italy (huge colour variety). You can make your choice in our exhibition area. Kavala semi-white marble for external frames, 2cm thick.

 

15) Sanitary products

Lavatory-pan with flushing, wash-basin, bathtub or shower tub, bathroom tiles (height 2,10m). The bathroom accessories included are: towel holder, robe hook, glass holder, soap holder, sponge holder, paper holder. There is also included a mirror (from our exhibition) with dimensions 50cm x 82cm and a water heater of 80 liters capacity, 60°C.

 

16) Painting

Both exterior painting with acrylic paints and interior painting with plastic colours (the customer can choose the colour – one colour per room).

The process involves two stages:


  • 1st stage: priming or acrylic paint.
  • 2nd stage: two coatings with plastic paint

 


17) Porches – Balconies

Metal frame porches and balconies, such as the one used for the construction of the house. There are also included metal railings, with pattern of our choice, tiles made in Italy, electric supply line with a socket in the central porch, the necessary equipment and a cold water supply system.