2nd CONSTRUCTION METHOD

2nd CONSTRUCTION METHOD

1) External walls


The walls are constructed using industrial iron (dimensions 30mm x 100mm), 100mm inflated polystyrene insulation panels and 11mm OSB (oriented strand board) in both sides. The outside part of external walls is constructed according to the following stages:


  • 1st stage: Installation of 50 mm inflated graphite polystyrene insulation panel with glue and plugs.
  • 2nd stage: Coating with fiberglass mesh and glue.
  • 3rd stage: Final stage with organic coating (ready to use plaster)

The inside part of external walls is constructed with a 12mm thick plasterboard, which is putty coated and rubbed.

 

2) Internal walls


The walls are constructed using industrial iron (dimensions 30mm x 100mm), 100mm inflated polystyrene insulation panels. Then an 11mm OSB (oriented strand board) is installed in both sides and a 12mm thick plasterboard, which is putty coated and rubbed.

 

3) Ceilings


They are constructed as follows: an 11mm OSB (oriented strand board) is installed 11mm below the trusses of the roof, 30mm inflated polystyrene and a 12mm thick plasterboard, which is putty coated and rubbed.

 

 

 

4) Roof

Metal roof trusses using industrial iron (dimensions 38mm x 38mm). εThere, we apply extremely thin wooden boards, a special membrane, studs (dimensions 4cm x 6cm) and Holland Style roof tiles, according to EU specification static studies.

 

5) Antirust prevention of the metal parts of the construction


All the metal parts of the construction are painted, both internally and externally, with the dipping paint method in rust preventive primer based on alkyd resin with a density of 1,60 – 1,66.

 

6) Hydraulic piping system

The whole piping system is based on submerged hot and cold water pipelines, made of green heat-sealing pipes, resistant up to -25°C. Moreover, the home drainage system, using siphons, ends outside the house.

 

7) Heating system (piping – radiators)

Installation of single pipe system. Boiler and radiators are not included.

 

8) Electrical systems

According to the EU Regulations, the whole electrical system of the house is submerged, with cables and a metal electric switchboard. Two reinforced sockets in the kitchen, over the kitchen bench and a socket for the hairdryer in the bathroom are included. There are also included electric supply lines for the refrigerator, the kitchen oven, the dishwasher, the washing machine, the air-condition, the water heater, the doorbell, a telephone line and a television line (the installation is done according to the customer’s choice). Both switches and sockets are made in Europe. Moreover, we supply single phase power up to your house.

 

9) Interior frames

They are made of excellent quality wood with laminate coating. You can choose the colour you prefer in our exhibition area, where you can also find a huge variety of door handles and locks.

 

10) External frames

German made KBE System 70 mm composite panel external frames and front door frame of white colour. You can choose what you prefer by visiting our exhibition area.

 

11) Window glasses

Double glass (transparent) windows (dimensions 0,4mm+0,4mm).

 

12) Kitchen cabinets

Melamine kitchen cabinets of excellent quality, Soft Forming, hanging or base ones, up to 6 meters. Cabinets’ height 90cm, with kitchen bench and an embedded kitchen sink with two tanks. Kitchen tiles and a hot and cold water tap, which you can choose from our exhibition area, all made in Italy, are installed over the kitchen bench.

 

13) Wardrobes in the bedrooms

Melamine wardrobes of excellent quality, Soft Forming, in each bedroom, including wardrobe handles of your choice (dimensions 1,80m x 2,70m each).

 

14) Floors

All the tiles are made in Italy (huge colour variety). You can make your choice in our exhibition area. Kavala semi-white marble for external frames, 2cm thick.

 

15) Sanitary products

Lavatory-pan with flushing, wash-basin, bathtub or shower tub, bathroom tiles (height 2,10m). The bathroom accessories included are: towel holder, robe hook, glass holder, soap holder, sponge holder, paper holder. There is also included a mirror (from our exhibition) with dimensions 50cm x 82cm and a water heater of 80 liters capacity, 60°C.

 

16) Painting

Both exterior painting with acrylic paints and interior painting with plastic colours (the customer can choose the colour – one colour per room).

The process involves two stages:


  • 1st stage: priming or acrylic paint.
  • 2nd stage: two coatings with plastic paint


 


17) Porches – Balconies

Metal frame porches and balconies, such as the one used for the construction of the house. There are also included metal railings, with pattern of our choice, tiles made in Italy, electric supply line with a socket in the central porch, the necessary equipment and a cold water supply system.